Code of practice for mechanical ventilation and air conditioning in buildings Code of practice for ventilation principles and designing for natural ventilation Glossary of building and civil engineering terms. Sanitation Requirements For Electrical Installations Sanitary Installations - Part 2: Code Of Practice For Space Requirements For Sanitary Appliances Drain and sewer systems outside buildings.

Generalities and definitions Drain and sewer systems outside buildings. Performance requirements Drain and sewer systems outside buildings. Planning Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages Drain and sewer systems outside buildings. Hydraulic design and environmental considerations Gravity drainage systems inside buildings.

Sanitary pipework, layout and calculation Design of buildings and their approaches to meet the needs of disabled people. Code of practice Code of practice for control of condensation in buildings Graphical symbols and signs. Public information symbols Closed-Circuit Television (Cctv) - Management And Operation - Code Of Practice Waste management in buildings. Code of practice.

Dec 21, 2015. Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances. AMD 1:2009 BS 6465- 2:1996 Sanitary installations. Code of practice for space requirements for sanitary appliances BS6465 – 3: 2006 Sanitary Installations. Code of Practice for the selection,. Torrent FXpansion BFD2 Big Orchestral Marching Band Expansion Pack H more.

Sanitary installations.

Sanitary tapware. General specifications for flow rate regulators Soft solder alloys. Chemical compositions and forms Corrosion of metals and alloys. Determination of dezincification resistance of brass Specification for low-resistance single taps and combination tap assemblies (nominal size? And 3/4) suitable for operation at PN 10 max. And a minimum flow pressure of 0.01 MPa (0.1 bar) Copper and copper alloys.

Seamless, round copper tubes for water and gas in sanitary and heating applications Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber Copper And Copper Alloys - Plumbing Fittings - Fittings With Ends For Capillary Soldering Or Capillary Brazing To Copper Tubes Copper And Copper Alloys - Plumbing Fittings - Fittings With Compression Ends For Use With Copper Tubes Copper And Copper Alloys - Plumbing Fittings - Fitting With Compression Ends For Use With Plastics Pipes Copper And Copper Alloys - Plumbing Fittings - Fittings With Short Ends For Capillary Brazing To Copper Tubes Code of practice for earthing Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests Water supply.

Requirements for systems and components outside buildings Building valves. Combined temperature and pressure relief valves.

Tests and requirements Building valves. Expansion valves. Tests and requirements Specifications for installations inside buildings conveying water for human consumption. General Specifications for installations inside buildings conveying water for human consumption.

Design Code of practice for thermal insulation of pipework and equipment in the temperature range of -100C to +870C Copper indirect cylinders for domestic purposes. Open vented copper cylinders. Requirements and test methods Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption.

Technical delivery conditions Devices to prevent pollution by backflow of potable water. Unrestricted air gap. Type A Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C). Specifications for components and the system. Metric series Cisterns for domestic use.

Cold water storage and combined feed and expansion (thermoplastic) cisterns up to 500 l. Specification Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions Valves for waterworks purposes.

Stem caps for use on isolating valves and associated water control apparatus. Specification Heating systems in buildings. Installation and commissioning of water based heating systems Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A Devices to prevent pollution by backflow of potable water. Air gaps with minimum circular overflow (verified by test or measurement).

Family A, type G Sanitary installations. Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances Specifications for installations inside buildings conveying water for human consumption. Simplified method Water quality.

Guidance on sampling of drinking water from treatment works and piped distribution systems Water quality. Sampling for microbiological analysis Sanitary installations. Code of practice for the selection, installation and maintenance of sanitary and associated appliances Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D Acrylonitrile-butadiene-styrene (ABS) pressure pipe. Specification Acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe.

Specification Water quality. Guidance on the design of sampling programmes and sampling techniques Water Quality - Sampling - Part 1: Guidance On The Design Of Sampling Programmes And Sampling Techniques Adhesives for thermoplastic piping systems for fluids under pressure. Specifications Explosive atmospheres. Electrical resistance trace heating. General and testing requirements Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U).

Fittings Specifications for installations inside buildings conveying water for human consumption. Operation and maintenance Water quality.

Heating Systems In Buildings - Design For Water-Based Heating Systems Heating Systems In Buildings - Design For Water-Based Heating Systems Bs 8554 - Code Of Practice For The Sampling And Monitoring Of Hot And Cold Water Services In Buildings Bs 8551 - Provision And Management Of Temporary Water Supplies And Distribution Networks (Not Including Provisions For Statutory Emergencies) - Code Of Practice Bs 8458 - Fixed Fire Protection Systems - Residential And Domestic Watermist Systems - Code Of Practice For Design And Installation.

Description:This part of BS 6465 gives recommendations on the location, numbers, siting, design and management of public toilets. It is applicable to the provision of new facilities and to the retention and refurbishment of existing facilities. This standard is applicable to the following types of public toilet facilities: a) municipal public on-street toilets; b) off-street publicly available toilets (e.g.

In shopping malls); c) automatic public conveniences (APCs); d) street urinals; e) facilities for disabled people, from the point of view of scale of provision and location; f) baby changing and ancillary toilet facilities. Overview: BS 6465-4:2010 Sanitary installations. Code of practice for the provision of public toiletsThis part of BS 6465 provides recommendations and guidance intended for those responsible for the surveying, assessing, planning, commissioning, designing, managing and use of public toilets. The recommendations and guidance in this standard are intended to cover public toilet provision for the full range of users and in all locations including towns and cities, rural areas and villages and in relation to main transport routes and termini.The recommendations in this part of BS 6465 are applicable to new public toilet installations. They are also applicable to the upgrading of existing public toilets. However, it is accepted that it might not be possible to upgrade existing toilets to be in accordance with all the recommendations in this standard, for example for physical or economic reasons.It is important to note that it is not intended that any public toilet be closed just because it is not entirely in accordance with this standard, as any public toilet provision is considered to be better than none.This part of BS 6465 gives recommendations on the location, numbers, sitting, design and management of public toilets.

It is applicable to the provision of new facilities and to the retention and refurbishment of existing facilities.This standard is applicable to the following types of public toilet facilities:? Municipal public on-street toilets? Off-street publicly available toilets (e.g.