BMW 1.4.0 SCANNER DIAGNOSTIC TOOL This is your opportunity to purchase (1) Brand New BMW DIAGNOSTIC CODE RESET TOOL (version 1.4.0) PA SOFT equivalent. This is a must-have device for all your code scanner, diagnostic, oil and fault reset needs!! With this tool you can save that dreaded trip to the BMW dealership, just to be charged a $100/hr 'diagnostic service fee' when it takes them 15 minutes using the same basic tool being offered here in this listing. You can clear faults and reset oil and service light with a simple press of a button! I would strongly recommend having this tool at your availability whenever the day comes when you will need it. Share it with your local BMW community and clear friends and family car's fault codes as well.

If Coding for an extended period of time (>30 minutes or so How to install and configure BMW ENET E-sys software on MacBook Pro V10? Go ahead and install the bmw scanner software. After you're done, plug the scanner into your OBD2 port, without having it plugged into your computer. Wait like 5 seconds (not 100% you even need to wait the 5 sec). Then, plug it in. Your computer will try several things. It'll attempt to find the driver and.

There are no subscription or fees needed to activate this device. Simple save the EEPROM and Coding files to your PC and it is ready to use. Advanced coding is possible through the instrument cluster, light control module, airbag, immobilizer, etc.

Depending on your vehicle and equipment available. A laptop is recommended.

PC with Windows XP or VISTA operating system is required. Click here for the OBDII port. No soldering required!! Pins 7 & 8 have been soldered to allow for proper coding. All International Bidders Welcome!! Will Work on the Follow OBDI & OBDII BMW Models.

• DTCs description in DME MS43.0, EWS3, SRS MRS4 • Clearing DTCs in same units • EWS-DME synchronization code in DME MS43.0 • Live data in DME MS43.0, EWS3, SRS MRS2 and MRS4 • Status of all keys in EWS3 • EWS3 coding data interpretation • Equipment correction in SRS MRS4 • Allows you to read and erase error messages. Adaptador Isatap De Microsoft Windows 7 Descargar Y. When your check engine light goes off codes are stored in the cars computer, this will allow you to read the actual errors (not just code numbers that you need to look up) and even erase them. • The scanner will also code features in your car i.e. One touch window roll down and up with the use of the key, no more day time running lights, or reactivate them, flashing lights when you lock/unlock the car, even tell the car that you now have HID and also deactivate some of the OBC (on board computer) checks if you run LED lights and don't want error messages Instructions on how to use BMW 1.4.0 Scanner: • Run the software disc that comes with it (must be used with windows XP or older) Unzip the installer tool • Run the installer program and save it to your desk top.

• Plug in the scanner using the provided USB cable into your computer • Your computer will recognize new hardware and search for drivers, it will not find any. • On your computer go to My computer then to the C drive then click on the folder marked BMW Scanner. Inside will be a folder marked drivers with a PDF telling you how to install them. • Once that is done you are ready to rock. Open the file on your desk top and it should say that the drivers are installed and give you the option to continue (dont click it continue yet). • Under the dash on the driver side is the access port. Open the latch and plug the scanner in.

• Turn your car key to position 1 • Click continue, it will tell you to turn the key (you already did that, no need to go past position 1) then press continue, click continue. • It will do a quick scan then it will tell you what car you drive and every single option that came with the car (neat huh?). • Next you will be greeted by this screen. • On the left click scan, it will run through every diagnostic and report back all errors.

NOTE, it will not be able to connect to every singe one listed on all 3 pages, I have no idea why. But honestly I dont need to access them all so I didnt care. • Once it is done scanning it will tell you of any and all errors that have been stored. Double click on the line with the errors and it will let you access that section to see what is wrong and even erase the errors if they no longer exist.

• Now, to change your features. • Double click on the ZKE line and a new window will pop up. • On the left will be a button marked coding. Click that, then click recoding.

The window will change to another that will give you access to windows roll up and down, auto door locks and all sorts of other features. Features: Specifications: A) Operation Temperature: -20 ℃ -- 75 ℃ B) Storage Temperature: -40 ℃ -- 120 ℃ C) Power: 8V -- 24V Contents: • CD software • USB cable • BMW OBD2 Interface.

Hey Guys I bought a PA 1.4 Scanner and mini-disc from a board member months ago and still havent successfully installed the software. Basically, I'll insert the disc, go through the installation, then it tells me the drivers dont work. So I then plug the scanner into the computer via USB and it tells me that the drivers cannot be found. I am wondering if the install and driver files may be corrupt or too old to recognize on my Windows 7 Ultimate. Im also wondering if you guys have known working install & driver files that you could possibly drop box to me to try.

Just trying to get this software running so I can go scan the beast. Thanks in advance, Dave.

Some users had issue on installing software driver on Win 7 64bit, but no problem on Win 7 32-bit. Following is the step-by-step instruction to install or update the BMW Scanner USB driver for Windows 7 32-bit. Pre-installation download: Free download BMW scanner V1.4.0 Pa-soft If the driver is not compatible with Windows 7 or you have not logged in as 'Administrator', latest win 7 driver can be downloaded here: The USB driver can be installed for win7 32 bits without any issue.

But for Win7 64-bit, you need to download the latest driver from www.ftdichip.com. USB driver on Win 7 32-bit instruction: 1) Remember where the folder/the program is installed.

This will help to tell Win 7 O/S to locate the USB driver. For example: I:3 in 1bmwscan140abmw 140 driver. Click Window 'Start' button and chose 'Control Panel' GUI button 3) Select 'System' and then 'Device Manager' GUI button 4) Select 'Universal Serial Bus controller” 5) Select the USB device that is labeled as ' 6) Right click to invoke sub menu of the 'BMW Scanner' Select 'Update Driver Software' 7) Select 'Browse My Computer for Driver Software' 8)Click 'Browse' and locate where the software folder is located. And tick 'Includes subfolders' as well. 9) Locate “BMW V1.4.0 Drivers” folder and press the 'OK' button.

10) Check the folder is correct and click on the 'NEXT' button to install the USB driver. 11) When the system will display “The best driver software for your device is up to date” message, the is well installed on Win 7, 12) Right click on the BMW Scanner and select 'Properties' to confirm 'The driver is working properly'.

Please ensure that you MUST have 'administrator right' to install the USB driver. 13) Plug the BMW v1.4.0 scanner cable with vehicle via OBD diagnostic socket. The label should be facing to the door with the LED light turn ON. If your BMW model has 22-pin diagnostic socket, you properly need another.